ECW220 Wi-Fi 6 (802.11ax) 2x2 Indoor Wireless Access Point features 802.11ax technology, such as OFDMA, MU-MIMO, and spatial reuse, to expand the capabilities of Wi-Fi.

Dual concurrent 802.11ax Wi-Fi 6 architecture & backward-compatible. Supercharged speeds up to 1,200 Mbps (5 GHz) & up to 574 Mbps (2.4 GHz). 1 GB 802.3af PoE port for easy placement up to 328 feet from a power source. WPA3 & WPA2-AES authentication support. Cloud Managed with AP & Mesh mode. Quick-scan device register & configuration and remote monitoring & troubleshooting. Cloud manage an unlimited number of APs from anywhere with the EnGenius Cloud App. Mesh wireless support simplifies setup, optimizes signals, and enables self-heals.

Ask For Price

KUWES CAT6 48 PORT PATCH PANEL

Accessories

KUWES CAT6 48 PORT PATCH PANEL

Ask For Price

PWR-4320-AC=

Get efficient power supply for your Cisco Integrated Service Routers with the Cisco Power Supply. This external AC power supply operates at a voltage of 100 - 240 volts.

Product	PWR-4320-AC=
Product Description	AC Power Supply for Cisco ISR 4320.
Service Category	C

Ask For Price

Cisco SG220-26-K9-EU SMB Switch

Switches, Cisco, Switches

24 10/100/1000 ports, 2 Gigabit RJ45/SFP combo port, EU

Ask For Price

-2%

Cisco WS-C2960XR-48TS-I

Switches, Cisco, Switches

AED 6100

USD 1647

Cisco WS-C2960XR-48TS-I

Cisco Catalyst 2960-XR series switches offer power resiliency with optional dual field-replaceable power supplies and IP Lite Cisco IOS software with dynamic routing and Layer 3 features.?WS-C2960XR-48TS-I is one of 2960-XR switches, IP Lite switch, supporting forty-eight 10/100/1000 Ethernet ports and four 1G SFP uplinks. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.

Add to cart

BEST ON OFFER

-29%

superiOrtec FIBER OPTIC DUPLEX PATCH CORD, SM, SCAPC-SCAPC, G657.A2, 5METER, LSZH, 2.0MM JACKET, YELLOW

SuperiOrtec, superiOrtec Fiber Patch Cords, Fiber Patch cords

AED 18

USD 5

Add to cart

Ubiquiti Nano beam NBE 5AC GEN2

Access Point, Access Points, Ubiquiti

Ubiquiti Nano beam NBE 5AC GEN2

Ubiquiti Networks launches the latest generation of airMAX? CPE (Customer Premises Equipment), the NanoBeam 5AC Gen 2.Improved Noise Immunity The NanoBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.Integrated Design The radio and antenna are combined to create a more efficient and compact CPE. The NanoBeam 5AC Gen 2 gets maximum gain out of the smallest footprint. Providing high performance and an innovative form factor, the NanoBeam 5AC Gen 2 is versatile and cost effective to deploy

Ask For Price

Customized 4 Fibers OM3 Multimode LC/SC/FC/ST/LSH Indoor Tight-Buffered Multi-Fiber Breakout Cable #39041

Customized Fiber Cables

4 Fibers 50/125 OM3 Multimode Indoor Multi-Fiber Pre-Terminated Breakout Cable Indoor multi-fiber breakout cable is a low-cost, pre-assembled cable designed

Ask For Price

Dlink Fast Ethernet Fiber Media Converter

Accessories

Dlink Fast Ethernet Fiber Media Converter

Media Converters, Management Module, and ChassisFeatures Fast and Easy to Use ? One channel 10/100/1000 Mbps Ethernet to 100/1000 Mbps fibre optic conversion ? Plug-and-Play, no additional software required ? Can be used standalone or installed in the DMC-1000 chassis ? Half or full-duplex operation ? Auto-MDI/MDIX Easy Placement, Management, and Monitoring ? Mount up to 16 media converters in the specially designed DMC-1000 Media Converter Chassis ? Dedicated power supply for powering the chassis and all installed media converters ? Hot-swappable when mounted ? Front panel LEDs for instant status feedbackThe DMC Series Media Converters, Management Module, and Chassis are a set of standalone Plug-and-Play media converters that offer increased flexibility when expanding a new or existing network. The DMC Series provides network administrators with a wide variety of solutions to expand networks over a greater distance while maintaining compatibility with existing network equipment. Meanwhile, the DMC-1000 Media Converter Chassis provides a practical solution for installing multiple media converters in one convenient chassis. This both saves space and optimises cable placement. The chassis can also be used in conjunction with the DMC-1002 Management Module, which allows administrators to monitor and manage all media converters installed in the DMC-1000 remotely. Flexible Media Conversion Media converters convert signals that are transmitted from one type of media to another so that they can be transmitted over a different type of media. This series of media converters converts 10/100/1000 Mbps copper Ethernet to a 100/1000 Mbps fibre optic connection. This allows you to expand your network by connecting longer distance, high-speed fibre optic cables between devices that are otherwise connected with short distance Ethernet cables, such as Cat. 5 twisted-pair cables. Dedicated Storage Solution The DMC Series product lineup includes a wide range of independent media converters as well as the DMC-1000 Media Converter Chassis, capable of housing up to 16 media converters. You can start with a single media converter, equipped with its own housing and AC power supply. As network requirements grow, you can mount the DMC-1000 in your equipment rack and conveniently install all your media converters into the chassis. The housing of each media converter can be easily removed, allowing it to be installed into the chassis. The installed converter module is then powered by the chassis? power supply.

Ask For Price